DIY – Wind Turbine Low Wind Speed Start Short Blades. If you need to buy a set of these 16 gauge 15″ Aluminum Short Blades, let me know and I’ll work out a p…
Video Rating: 5 / 5
http://georgechaniotakis.blogspot.gr First you need a pvc pipe should have a diameter of 10 cm. One pipe can make four blades. “how big do you need them” my …
Video Rating: 4 / 5
13 comments
No ping yet
חיים בן אלון says:
April 22, 2014 at 4:59 pm (UTC 0)
I learned something, i think that if you use the green blades to charge a
battey bank then the low voltage is good for charging the batteries, so if
you add batteries to your system then you can go back to the 3 long plus 3
short to low wind startup charging the batteries.:-)
Pbeas52 says:
April 22, 2014 at 5:04 pm (UTC 0)
Nice job with the home made blades! Are you getting enough voltage for a
trickle charge at the low wind speeds?
francis kaizar Talatala says:
April 22, 2014 at 5:58 pm (UTC 0)
what is the rated output of this turbine sir?
richard cero says:
April 22, 2014 at 6:04 pm (UTC 0)
ametek is better
electronicdawg says:
April 22, 2014 at 7:00 pm (UTC 0)
DIY – Wind Turbine Low Wind Speed Start Blades Build Your Own
electronicdawg says:
April 22, 2014 at 7:14 pm (UTC 0)
Love to tinker.
papa54320 says:
April 22, 2014 at 8:11 pm (UTC 0)
dad gum Dawg. You have built a lot of stuff.. Good going on the wind fans..
CrapPolice says:
April 22, 2014 at 8:39 pm (UTC 0)
NICE JOB MAN
GEORGE CHANIOTAKIS says:
April 22, 2014 at 8:47 pm (UTC 0)
View this video AC INDUCTION MOTOR CONVERSION TO AC PERMANENT MAGNET
GENERATOR this motor has the wind turbines it is converted by me!
Philippos Kakarakis says:
April 22, 2014 at 9:16 pm (UTC 0)
polu wraio apotelesma!
ibezag0 says:
April 22, 2014 at 10:12 pm (UTC 0)
dude, wheres your gloves?! j/k
Roman Campbell says:
April 22, 2014 at 10:39 pm (UTC 0)
What does your motors’ name plate say? What generator did you use to make
the voltage?
Louis P says:
April 22, 2014 at 11:20 pm (UTC 0)
the structure that held the blades was it done by hand or laser cut