This is a brief video showing how I assembled and installed a Hybrid Alternative energy system.
Video Rating: 5 / 5
Mar
13
This is a brief video showing how I assembled and installed a Hybrid Alternative energy system.
Video Rating: 5 / 5
5 comments
No ping yet
Steve Loyd says:
March 13, 2014 at 4:21 am (UTC 0)
The turbine works extremely well as I have a lot of wind here. It was
overcharging my battery bank and turning on the dump, so now I have it
connected only to the grid. I have had no problems with the turbine and it
requires very little maintenance. I check all fasteners for tightness and
adjust the guy wires on at least a monthly basis
Steve Loyd says:
March 13, 2014 at 4:38 am (UTC 0)
I have faded out that controller as I had some problems with it. I now use
an Intronic Power MPPT75 . Also I divert all of the power from the turbine
and most of the power from the solar directly to the grid. Watch my other
video “Converting a 5kw Jacuzzi To Alternative Energy”, it shows the
changes.
dezdetin says:
March 13, 2014 at 4:49 am (UTC 0)
Waal!! I like your kind of living sir!
Guy A. Smith says:
March 13, 2014 at 5:48 am (UTC 0)
Steve, greetings sir. How is that Greenergy Star hybrid controller working
out for you? You’re channel is the only one I’ve seen it on so far. I am
about to begin my first hybrid alternative energy system and that
controller caught my eye but, there’s not many reviews on the Canadian
equipment.
Steve Loyd says:
March 13, 2014 at 6:43 am (UTC 0)